Own the precision welder shirt—and the TIG skills to back it

You don’t wear a precision welder shirt for hype; you wear it because every bead must pass the micrometer and the microscope. TIG Welding Secrets is the field manual for making that standard automatic. Clear, step-by-step guidance shows you how to set amps, pulse, frequency, and balance with intent; prep tungsten correctly; control gas coverage; lock in torch angles; and sync filler timing with heat input. Learn fixture strategy, joint prep, and contamination control so the puddle stays calm and the heat-affected zone stays tight—on stainless, aluminum, chromoly, and more.

Developed by an aerospace TIG lead with deep shop time on thin-wall and mission-critical joints, this playbook packages proven workflows, checklists, and parameter windows you can use immediately. Expect faster setup, cleaner arc starts, and less rework. Troubleshoot porosity at the source, close pinholes, weld razor-thin tabs without collapse, and stack consistent dimes even out of position. If “precision welder shirt” means something in your shop, TIG Welding Secrets gives you the repeatable process to prove it, bead after bead.

• Dial-in charts for stainless, aluminum, and titanium: pulse/AC settings, tungsten geometry, gas flow ranges.
• Micro-control techniques for tight tolerances: heat sinking, back purging, arc initiation, filler metallurgy.
• QA-ready outcomes: distortion control, color targets, inspection notes, and fixture templates for repeatability.